Volvo Penta TAD941GE Operator's Manual page 13

Instruments and Controls
18
Engine
Rpm and coolant temperature is shown in the upper
part of the display. In the lower part it will show trip
computer and a fuel level indicator, if these function are
installed.
Multi
In the multi mode, button 2, the information can be
shown in four windows,analogue or digital. The display
toggles between the two when button 2 is pressed
repeatedly.
By pressing button 5, the right arrow, you choose what
information to be shown in the different windows.
Press repeatedly on the button that correspond to the
window, until desired information is shown.
Trip
To display the trip computer press button 3, Trip
Trip Fuel, since last reset
Fuel Rate, fuel consumption
Trip hours, since last reset
Engine hours, total amount of operating hours
Reset by pressing button 3 for three seconds until a
beep is heard.
Graph
The information is shown as graphs. Press button 4
repeatedly to choose what information will be shown.
The time interval is set in the Configuration menu.
If the connection is broken there will be a straight line
in the display.
47702660 03-2013 © AB VOLVO PENTA