Customer Parameter / Versatile - Volvo Penta TAD941GE Operator's Manual

Instruments and Controls
14
Setup
parameter setting in the engine's control systems. Dif-
ferent menus appear under Customer parameter,
depending on whether Versatile or Gen set has been
selected from Set application. See below.
The parameters that can be set/selected (choice is
made with the SEL button) are:
Set application, setting Versatile or Gen set.
•
Depending on the selection made here, different
menus will appear under Customer parameter.
• Unit, setting of units (metric or US imperial).
• Language, setting the language used on the dis-
play. Choose between English, French, German
and Spanish.
• Stop energized to, setting of external stop input.
Activated by Stop or Run.
Stop: The stop input must be connected to voltage
to stop the engine.
Run: The stop input must be connected to voltage
to run the engine.
• Customer parameter, setting alarm limits. Refer to
Customer parameter / Versatile and Customer
parameter / Gen set.
Throttle input setting, setting of engine-speed
•
control and voltage limits. Refer to Throttle input
setting.
• Display setting, setting the display. refer to Display
setting.

Customer parameter / Versatile

• Idle engine speed - setting idle speed.
• Preheat on ignition - activation of automatic pre-
heating. The engine control system senses if pre-
heating is needed and activates it directly at switch-
on.
• Governor gradient (Nm/rpm) - setting of droop
level, when activated. For activation, refer to Gov-
ernor droop in the main menu.
• Oil temp warning limit (°C) - setting alarm limit for
oil temperature.
• Coolant temp warning limit (°C) - setting alarm
limit for coolant temperature.
47702660 03-2013 © AB VOLVO PENTA