Hard Drive Installation - Fortinet FortiManager 3700F Quick Start Manual

Hard Drive Installation

"
The FAZ-3700F supports 60 x 3.5
hard drive:
1. Power down the system and disconnect the AC power cords
WARNING: Do not operate the device with drives removed, unless for short periods
of time such as when hot-swapping hard drives
2. Open the top lid of the chassis
3. Remove a hard drive carrier
4. Press the release button on the drive carrier to retact the handle
5. Insert the hard drive into the carrier
6. Close the carrier handle
7. Push the carrier into the hard drive bay until it locks in position
NOTE: Match the labels on the hard drive and carrier as per the HDD LAYOUT
Drive #: 00
Drive #: 01
Drive #: 02
Drive #: 03
Drive #: 04
Drive #: 05
Drive #: 06
Drive #: 07
Drive #: 08
Drive #: 09
Drive #: 10
Drive #: 11
Drive #: 12
Drive #: 13
Drive #: 14
16
hard drives in toolless hard drive carriers. To install a
Drive #: 15 Drive #: 30
Drive #: 16 Drive #: 31
Drive #: 17 Drive #: 32
Drive #: 18 Drive #: 33
Drive #: 19 Drive #: 34
Drive #: 20 Drive #: 35
Drive #: 21 Drive #: 36
Drive #: 22 Drive #: 37
Drive #: 23 Drive #: 38
Drive #: 24 Drive #: 39
Drive #: 25 Drive #: 40
Drive #: 26 Drive #: 41
Drive #: 27 Drive #: 42
Drive #: 28 Drive #: 43
Drive #: 29 Drive #: 44
Drive #: 45
Drive #: 46
Drive #: 47
Drive #: 48
Drive #: 49
Drive #: 50
Drive #: 51
Drive #: 52
Drive #: 53
Drive #: 54
Drive #: 55
Drive #: 56
Drive #: 57
Drive #: 58
Drive #: 59
17