Table of Contents
Advertisement
Installation
1
Using the provided hardware, the device can be mounted on a DIN rail or to a wall. Note
that M3 x 5mm have been provided for the DIN rail, but you will need to supply your own
wall mount and anchors screws.
To mount the device on a DIN rail
FortiSwitch
DIN Rail
Bracket
1. Connect the DIN rail bracket to the device using the provided bracket screws.
2. Position the device directly in front of the DIN rail, ensuring that the top of the DIN rail
bracket hooks over the top of the DIN rail.
3. Rotate the device until the bottom of the DIN rail bracket sits against the bottom of
the DIN rail.
You can now proceed with connecting your device.
Note:
This equipment is not suitable for use in locations where children are likely to
be present.
6
FortiSwitch
DIN Rail
FortiSwitch
Bracket
DIN Rail
Bracket
DIN Rail
DIN Rail
To mount the device to a wall
1. Connect the wall mount brackets to the device using all of the provided brackets
screws.
FortiSwitch
Wall Mount
Brackets
2. Hold the device with the attached wall mount brackets against the wall in the desired
mounting location and mark the locations for the two anchors.
3. Using an appropriate drill, insert the mounting anchors into the wall at the marked
locations.
4. Screw the device into the anchors, then slide it downwards to secure it in place.
Wall Mount
Brackets
You can now proceed with connecting your device.
7
Advertisement
Table of Contents
