Table of Contents
Advertisement
Control Elements
EN
Settings
The appliance is started by pressing the ON/OFF switch on the control unit.
The display shows the default temperature (68˚C) and the actual water temperature
in the water tank.
After 5 seconds, the default temperature (68˚C) and the default operating time of 3
hrs 30 mins appear. The appliance starts to heat up.
To make changes to the temperature, operating time and time remaining to
switching on, make the changes in the following order:
Temperature Change
1. Press the 'SET' key to change the temperature setting.
It is possible to set the temperature in the range of 20–100˚C.
14 / 20
16. Display
17. Temperature indicator
18. Time indicator
19. ON/OFF switch
20. SET key
21. Setting value decrease key
22. Setting value increase key
Installation and operation
Fig. 2
200128
Advertisement
Table of Contents
