Before using the appliance for the first time
In this section, you can read about
How to set the clock after connecting up your appliance
■
How to clean your appliance before using it for the first time
■
Setting the clock
Note: When you press the
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
:
flashes in the clock display.
‹
‹‹
Briefly press the
clock function button to go to the
KJ
1.
setting mode.
The
KJ
and
3
symbols light up.
clock display.
Set the current time using the rotary selector.
2.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the
button repeatedly until the
Change the time with the rotary selector.
Operating the appliance
In this section, you can read about
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
Switching on the appliance
Turn the operating mode selector for the
1.
for the
top oven clockwise until the desired operating
ô
mode is selected.
Electronic clock
In this section, you can read about
how to set the timer
■
how to switch your appliance off automatically (cooking time
■
and end of operation)
how to switch your appliance on and off automatically (preset
■
operation)
how to set the time
■
find out how to activate rapid heat up
■
6
clock function button, you have
KJ
‚ƒ
:
‹‹
appears in the
KJ
clock function
KJ
and
3
symbols light up again.
bottom oven or
õ
Cleaning the appliance
Clean your appliance before using it for the first time.
Remove the accessories from the cooking compartment.
1.
Completely remove any residual packaging (e.g. chips of
2.
polystyrene) from the cooking compartment.
Clean the accessories and cooking compartment with hot
3.
soapy water (see section: Cleaning and care).
Heat with
Top/bottom heat at 240 °C for 30 minutes.
%
4.
Afterwards, wipe the cooled cooking compartment with hot,
5.
soapy water.
Clean the outside of the appliance with a soft, damp cloth
6.
and soapy water.
Turn the corresponding temperature selector clockwise, until
2.
the desired temperature is selected.
The corresponding
r
indicator lamp lights up while the oven
is heating up and during any subsequent heating.
Switching off the appliance
Turn the operating mode selector back to the
1.
Turn the temperature selector back to the
2.
After the appliance is switched off, the cooling fan may
continue to run.
Clock display
&ORFN IXQFWLRQ EXWWRQ
position.
Û
position.
Ú
5RWDU\ VHOHFWRU