General Description - Fieldmann FDB 200131-E Manual

EN
12

General description

3. GENERAL DESCRIPTION
Sanders are used to sand wood and similar products, painted surfaces, metal, stone, etc. There are sanders of
various different shapes in order to do specific jobs:
The vibrating sander recommended for sanding flat surfaces such as doors or furnitu-
re. Move the sander slowly and regularly, in the direction of the wood fibres.
DESCRIPTION AND LOCATION OF MACHINE PARTS
FIG. 1
Sanding pad holder
1.
On/off switch
2.
Vacuumcleaner connector
3.
DESIGNATED USE
The vibration sander is designed for dry sanding various materials such as wood,
gypsum, metals,etc. Any other use is prohbited. The buyer accepts all liabilities, legal
and otherwise, for any damage or injury resulting from improper use of the product (i.e.
any other use than the above stated designated use).
RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We
accept no liability or warranty claims should the product be used in industrial and/or
commercial operations.
IMPORTANT INFORMATION FOR INITIAL OPERATION
Check the voltage on the type sticker of the machine. The voltage of your power supply
must not deviate more than 10% from the indicated voltage.
OPERATION INSTRUCTIONS
Changing the sanding pads
The sanding pad holder (1) is equipped with a hook and loop fastener to easily attach
and remove sanding pads. Keep the hook and loop surface clean to ensure maximum
hold. Use suitable sanding pads only!
FDB 200131-E