3. DESCRIPTION
Your multi-tool has been designed for light sanding, sawing and scraping application.
1. On/off switch
2. Speed adjustment wheel
3. Mounting point for accessories
4. Grip
5. Quick change level
6. Carbon brush cover
7. Carbon brush holder
4. ASSEMBLY
Before assembly, always switch off the machine and remove the mains plug from the
mains.
The sanding pad and the sanding paper must be used for sanding application.
Removing the mounting accessories (Fig. B)
Release the quick change lever (5) and slide the accessory forward to remove from the holder.
Slide the accessory in the holder and fasten the quick change lever (5).
5. USE
Switching on and off (Fig. A)
To Switch on the machine, slide the on/off switch (1) to the front.
To switch off the machines, slide the on/off switch (1) the rear.
Setting the speed (Fig. A)
The speed adjustment wheel is used for setting the speed. The speed adjustment wheel can be set to 6 positions.
The ideal speed depends on the application and on the material to be worked.
Do not set the speed during use.
Turn the speed adjustment wheel (2) to the required position.
MULTI FUNCTION TOOL
Description
11
EN
FDB 200352-E