Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fieldmann FDB 201401-E
Summary of Contents for Fieldmann FDB 201401-E
-
Page 4: Table Of Contents
Contents Electrical Angle Grinder INSTRUCTION MANUAL Thank you for your purchase of the electrical circular saw. For your personal safety, read and understand the Instruction Manual before using. Keep the Instruction Manual in a safe place for future reference. CONTENTS GENERAL SAFETY INSTRUCTIONS ..................... -
Page 5: Symbols
Symbols 2. SYMBOLS ELECTRICAL ANGLE GRINDER OPERATING INSTRUCTIONS... -
Page 6: Machine Description And Items Delivered
Machine description and items delivered | General safety instructions 3. MACHINE DESCRIPTION AND ITEMS DELIVERED Machine Description (See fig. 1) Switch Screw of Protective Cover Side Handle Washer Disk Lock-Button Grindstone Spindle 10 - Tightening Female Screw Protective Cover 11 - Tightening Spanner Case Items Delivered... - Page 7 General safety instructions Do not use power tools in an environment where there is risk of starting a fire or explosion; this refers to places where there are flammable liquids, gases or dust. Sparks form on the power tool’s commutator, which can cause dust or fume ignition. When using power tools, unauthorized persons, especially children, should be denied entry to the job site! In case you are interrupted, you can lose control of the current activity.
- Page 8 General safety instructions Personal safety When using a power tool, be careful and alert, pay special attention to the activity you are doing. Concentrate on your work. Do not work with power tools if you are tired or if you are under the influence of drugs, alcohol or medication.
- Page 9 General safety instructions Do not overload power tools. The power tool will function better and more safely if it operates at speeds for which it was designed. Use correct tools that are designated for the given activity. The correct tool works better and more safely. Do not use power tools that cannot be turned on safely and cannot be turned on and off with a control switch.
-
Page 10: Special Safety Instructions
General safety instructions | Specific safety instructions Service Do not change parts of the tool, do not perform repairs on your own and do not interfere with the tool’s construction in any way. Leave tool repairs to qualified persons. Each repair or product modification performed without our company’s permission is inadmissible (it can cause injury or harm to the user). - Page 11 Specific safety instructions | Use and operation It is prohibited to use damaged accessories. The accessories have to be checked prior to each use: splitting and cracks of grinding disks, cracks of support blocks, tearing of excessive wear, loose or broken wires on wire brushes. If the accessories or tools were dropped, check it for damage or install undamaged accessories.
- Page 12 General safety instructions | Specific safety instructions Kick-back is a sudden reaction on pinching or seizing of a rotating disk, support block, brush or other accessory. Pinching or seizing causes sudden stoppage of a rotating tool, which subsequently causes, that uncontrolled tool moves in the opposite direction to the rotation of the tool in the moment of seizing.
- Page 13 Specific safety instructions | Use and operation Additional safety instructions for cutting Additional safety warnings specific for abrasive cutting: -Cutting disk may not strike material or exert excessive pressure. Do net attempt to achieve excessive depth of cut. Overloading of the disk increases the risk of distortion or seizing of the disk and kick-back or breaking of the disk.
- Page 14 General safety instructions | Specific safety instructions Additional safety instructions for wire brushing Safety warnings specific for wire brushing: This product is not intended for wire brushing Wire bristles are thrown away even during normal work. Do not overload wires by excessive pressure on the brush.
-
Page 15: Use And Operation
Specific safety instructions | Use and operation Do not use any reducers or other auxiliary parts for mounting grinding discs intended for different spindle diameter. Make sure that the material is adequately supported or fixed. Never use grinding disc to remove burrs. Make sure to prevent the sparks from hitting a person or igniting inflammable goods. -
Page 16: Working With Angle Grinder
Use and operation | Working with angle grinder How to attach and remove the grinding disc (Figure D,E,F) WARNING! Before attaching or removing the grinding disc always unplug the supply cable of the grinder from the socket. Put the grinder onto table with the spindle facing up. Attach the safety guard (5) according to instructions specified above. -
Page 17: Cleaning And Maintenance
Cleaning and maintenance | Operation and maintenance hints 8. CLEANING AND MAINTENANCE Before cleaning and maintenance, always unplug the supply cable of the tool from the socket. Your tool requires no additional lubrication or maintenance. It contains no parts that can be repaired by you. -
Page 18: Technical Specifications
1 .TECHNICAL SPECIFICATIONS Power supply............................230V~ / 50Hz Power input................................. Speed..............................Protection class................................II Disc diameter .............................. Ø Spindle thread ............................... M 14 Power supply cable length..........................1.8 m LpA: (sound pressure level)........................ dB(A) LwA: (sound power level)........................dB (A) ibration level..................... - Page 19 Technical specifications ELECTRICAL ANGLE GRINDER OPERATING INSTRUCTIONS...
-
Page 20: Disposal
.DISPOSAL The machine and its accessories are made of various materials, e.g. of metal and plastics. Hand-over damaged components to sorted waste. Get yourselves informed at a respective authority. INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED PACKAGING. Put any used package material to the place determined by the municipality for waste disposal.