Stanley SXPG42602 Owner's Operating Manual page 17

REPLACING THE CUTTING LINE SPOOL
1. Open the cutting line spool by pressing two release buttons
on the side and take out the winding core (Fig.14 & 15).
2. Divide a spare cutting line in 2 equal halves, fix it in the
winding core and start to wind the cutting line in two
separated rails (Fig.15). Please follow the indicated
winding.
3. Fix the 2 line ends (approx. 15cm) at the opening to keep
the line wound tightly. (Fig.16)
4. Guide the 2 line ends into the holes on the spool housing
and restore the spool cover. (Fig.17)
MAINTENANCE
Fig. 14
Fig. 16
17
Fig. 15
Fig. 17