Maintenance - Stanley SXPG42602 Owner's Operating Manual

TIPS FOR TRIMMING
Avoid hot surfaces by always keeping the tool away from your
body.
Cut all grass from top to down. This will prevent grass from
wrapping around the shaft housing and string head which could
cause damage from overheating. If grass becomes wrapped
around the string head, STOP THE ENGINE, disconnect the
spark plug wire, and remove the grass.
CLEANING AND CARE
Correct and regular cleaning is not only important for the safe
use of this product, but also extends its life span.
WARNING.
Always stop the engine and wait for the
engine to cool down.
Please remove dust, grass etc. from machine after every
application. Clean the machine with a wet cloth. For cleaning
difficult to reach areas, use a brush.
You may use pressurised air to remove persistent dust.
NOTE: Do not use chemical, acid, alkaline, grinding or other
aggressive cleaning agents. They could destroy the surface of
the product.

MAINTENANCE

WARNING.
Always stop the engine and wait for the
engine to cool down.
Disconnect spark plug wire and move it away from
spark plug.
When servicing, use only identical replacement parts. Use of
any other parts could create a hazard or cause product damage.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into your
eyes and other possible serious injuries.
INSPECTION AND MAINTENANCE
SCHEDULE
The maintenance interval is only a recommendation for
machines in ordinary operating condition. If there are any
abnormal signs from the machine, please do the proper
inspection and maintenance immediately.
OPERATION
Use the tip of line to trim grass; do not force string head into
uncut grass.
Avoid trees, flowers, stones, walls and other objects which can
cause the line breakage.
Check and feed the line regularly to maintain full cutting width
and performance.
MAINTENANCE
The tightening torque should follow the general screw
specification of different size, class and material.
If anything is unclear to you, please contact our service team for
help. See Page 2 or 4 for contact details.
All other repairs or maintenances which are not mentioned here
shall only be done by our service team or authorised personnel.
ITEM
Engine lubricant oil level
Loosened or lost screws
Damage of any part
Function of control elements
Fuel level
Leakage of oil or fuel
Cutting line
Engine oil replacement
Air filter cleaning
Spark plug check
15
HOURS OF OPERATION
Every time before use
Every time before use
Every time before use
Every time before use
Every time before use
Every time before use
Every time before use
Every 20 hours
Every 20 hours but every
10 hours if work condition
is dusty
Every 20 hours