Table of Contents
Advertisement
CAUTION.
This packaging contains sharp objects. Take care when
unpacking. Remove the machine, together with the
accessories supplied, from the packaging. Check carefully to
ensure that the machine is in good condition and account for all
the accessories listed in this manual. Also make sure that all the
accessories are complete.
PACKING CONTENTS (FIG. 1)
•
Trimmer Assembly (Engine with rear shaft).
•
Front handle Assembly.
•
Front shaft with cap.
•
Cutting line spool.
•
Cutting head shield with 1 screw pre-assembly.
•
Harness.
•
1pc screw driver.
•
1pc wrench for spark plug.
•
Bottle of engine oil.
•
Operator's manual.
WARNING.
To prevent an accidental start that
could cause serious personal injury, always
disconnect the engine spark plug wire from the spark
plug when assembling parts.
WARNING.
Never install, remove, or adjust any
attachments while power head is running. Failure to
stop the engine can cause serious personal injury.
INSTALLING THE CUTTING LINE SPOOL
Rotate the hub slowly to align the hole in the hub with the hole
in the shaft, Fig.2.
Lock the hub firmly using the screw driver provided by aligning
and insert through the two holes as shown in Fig.3. Hold the hub
with fingers all the times.
Screw the spool in place and turn the spool clockwise until it
cannot rotate any more with the locked hub.
WARNING.
The cutting line spool must be fixed
firmly with the hub. Failure to fix the cutting line spool
with the hub can result in serious personal injury.
UNPACKING
If any parts are found to be missing, please contact customer
service (details on page 2 & 4). Do not throw the packaging
away, keep it safe throughout the warranty period, then recycle
if possible, otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to the risk of
suffocation.
ASSEMBLY
10
Fig. 1
shaft
hub
Fig. 2
Fig. 3
Advertisement
Table of Contents
