Special Features In The Programme Sequence - Miele WTZH130 WPM PowerWash 2.0 Operating Instructions Manual

Table of Contents

Advertisement

 = Low water level
 = Medium water level
 = High water level
= Intensive rhythm
= Normal rhythm
= Sensitive rhythm
= Ultra sensitive rhythm
= Handwash rhythm
= Carried out
= Not carried out
The washer-dryer has fully electronic
controls with automatic load recogni-
tion. It takes in the right amount of wa-
ter required for the programme depend-
ing on the amount of laundry and its ab-
sorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load. Extra op-
tions which can be selected have not
been taken into account.
The washer-dryer's display continually
shows which stage of the programme
has been reached.
Special features in the programme
sequence
Anti-crease
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens and Silks pro-
grammes.
The door can be opened at any time
during the anti-crease phase.
1)
If a temperature of 60 °C or higher is
selected, or with  and  tem-
peratures, 2 rinses are carried out. If a
temperature of less than 60 °C is se-
lected, 3 rinses are carried out.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
0 rpm
(without spin) has been selec-
ted.
3)
Pre-rinse: a pre-rinse is automatically
carried out to remove dust.
4)
Run-up to spin: a run-up to spin is
carried out before the wash process
begins to deflate the pillows.
5)
Extra rinse: an extra rinse is carried
out when the Water plus option is se-
lected, if an extra rinse has been ac-
tivated as described in "Settings".
WASHING
43

Advertisement

Table of Contents
loading

Table of Contents