To omit the final spin (Rinse hold)
Use the Spin speed button to select
the (rinse hold) setting.
The laundry is not spun after the final
rinse and remains in the final rinse wa-
ter. This helps prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
To start the final spin:
Use the spin speed button to select
the required spin speed and confirm
your choice with OK.
The laundry will be spun at the speed
you have set.
or
Start the final spin with the Start/Stop
button.
The laundry will be spun at the max-
imum spin speed for the selected wash
programme.
To end the programme:
Use the spin speed button to select
the
0 rpm
setting (without spin) and
confirm your choice with OK.
The water will drain away.
To omit rinse and interim spin and
the final spin
Press the Spin speed button.
Select the
0 rpm
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in.
In some programmes an additional rinse
is introduced with this setting.
WASHING
setting.
35