Altering A Programme; Allocating Wash Blocks - Miele PG 8582 CD Operating Instructions Manual

Programme settings
Allocating wash
blocks
102

Altering a programme

A programme is altered in two steps:
- Altering the programme begins with a list of all wash blocks
allocated to the programme. First this list must be confirmed.
- Then the programme parameters can be altered.
Use this option to document all changes to factory settings in case
of a subsequent Service call requirement.
Programme and dispensing changes must be documented for
validated processes. In Germany this is a requirement of the
Medical Devices Operator ordinance (MPBetreibV).
The process must be validated again as necessary.
...
Programme settings

Change programme

Change programme
Select the programme you want to alter.

For more information see "Allocating wash blocks".
Every programme change begins with a list of the wash blocks.
Vario TD Inst 4trays
All wash blocks which are allocated to the programme are listed in
the display. The allocation can be adapted as necessary by Miele
Service.
Select the option

Further setting options will then follow. You can edit these in any
order you want.
Vario TD Instruments
Vario TD Inst 4trays
Accept
Pre-wash 1
Accept
and confirm with OK.