Miele PG 8582 CD Operating Instructions Manual page 93

Configuring the
interface
Ethernet
 Only specialists are permitted to configure the interface.
Open the menu as follows:

 button
Further settings

 Interface
Interface
Ethernet
RS232
Ethernet
-
Configuration of an Ethernet interface
- RS232
Configuration of a serial RS-232 interface
Select the type of interface and confirm your selection with OK.

Then the parameters for the interface must be configured.
Module status
-
Connection status displayed (
Address status
-
List of interface parameters, e.g. IP address, Subnet mask etc.
DHCP
-
The Ethernet interface can either be implemented via a Dynamic
Host Configuration Protocol (DHCP) or by setting the following
parameters:
IP address
–
Subnet mask
–
Standard gateway
–
DNS server automatic
–
DNS server 1
–
DNS server 2
–
– Port type
– Port
Further settings
Active Inactive
/ ).
93