Table of Contents
Advertisement
vario quick
Installation
DANGER
Severe injuries due to ejected parts in case of in-
correct machining of the blank screw!
Machining of the blank screw must only be carried
out in such a way that the threaded connection is
further tightened. The stop disc is attached to the
threaded screw with a left-hand thread.
INFORMATION
Guide values for turning the blank screw are:
Feed �� = 0.2����
Cutting depth ��
Cutting speed ��
7.
Machine the blank screw to the desired dimension.
Order hotline +49 7144.907-333
= 1����
��
��
= 220
��
������
13
Advertisement
Table of Contents
