Analog Devices EVAL-AD7928SDZ User Manual page 12

the sampling frequency up to this rate and the number of
samples to be taken.
The samples taken are then uploaded and displayed. An FFT
and/or histogram can be calculated and displayed. If you click
the Continuous button, the software repeats the process indefi-
nitely until you click Stop. (The Continuous button switches
to Stop when clicked).
Note that no data appears on the screen if the channels are not
selected. The ADC 1 On/ Off to ADC 8 On/Off buttons in the
Part Information section should be set to ON to select the
desired channels.
Rev. Pr.A | Page 12 of 13
EVAL-AD7928SDZ User Guide