Table of Contents
Advertisement
Installation -
Cabling
Pass the wires through and make all necessary connections.
Use a PoE Injector (required. Sold
separately) to connect data and power to
the camera using a single Ethernet cable.
Power requirements
PoE, IEEE 802.3at PoE+ class 4, (Adapter not
included)
Use a non-PoE Switch to connect data
using an Ethernet cable and use a power
adapter to power the camera.
OR
Power consumption
DC12V: max 13.2W, 1.1A
PoE: 14.8W
11
11
Advertisement
Table of Contents
