Advertisement
3.4. Zero and sensitivity adjustments (3.1. – 3.3.) are
mode alternately until both readings are correct.
3.5. Secure transport lock by turning knob counter-
clockwise
3.6. Remove balance pan, pan support, operation knobs
and cable. Attach balance housing. Press locking
bolts with screw driver and turn 90
illust. 2.2.
Open cover and place over balance housing. Close
zipper again, attach cord and control knobs. Install
balance pan.
3.7. Loosen transport lock by turning clock-wise.
o
clock-wise. See
7
Advertisement
