Subscribe to Our Youtube Channel
Related Manuals for Sartorius 1401 MP8
Summary of Contents for Sartorius 1401 MP8
- Page 1 Electronic Toploaders 1401 MP8, 1402 MP8, 1403 MP8, 1409 MP8 Installation and Operating Instructions...
- Page 2 Electronic Toploaders 1401 MP8, 1402 MP8, 1403 MP8, 1409 MP8...
- Page 3 Allow a warm-up period of 30 minutes after dust cover 6960 1401 connecting balance to line voltage. calibration weights for 1401 MP8 (2 x 1000 g) 7072 08 Delivery includes 1402 MP8 (1 x 200 g) 7072 17 1 electronic toploader...
- Page 4 Remove from packing: Check the factory setting of the voltage selector electronic precision balance, balance pan, pan and compare it with the available line voltage. support, dust cover, power cable. Correct the voltage: pull out and turn the voltage Write down the corrected voltage on selector.
- Page 5 Fit pan onto support and make power connection Operating mode switch (5). STAND BY/ON. “Stand by” – all components subject to wear are turned off. “|” – unit is instantly read to operate after completion of the Autocheck. Autocheck: Taring: press tare button (8) display shows 0.00 g Balance electronics are being checked for correct (0.0 g).
- Page 6 Put calibration weight on pan. lf you get "CE" display, tare display and repeat When display = calibration weight, remove the calibration procedure. weight, tare, replace weight on pan. Display = calibration weight ±0.01g(±0.1g). For calibration weight, see accessories. For below-balance weighing, turn cover on the bottom of the balance revealing below-balance weighing device.
- Page 7 Unlocking the operating program Keep the zero button, depressed and switch to “|” Switch to “ ” mode. Slide unlocking switch to operation. right. Parameter input When display shows CH 5, release the zero The display first shows the "pages" as a button.
- Page 8 1 3 1 page line word Balance operating program (Active Parameters) Adaption to environment and Code Digital filter application filtration normal C 1 1 1 To obtain Optimum adaption of your filtration amplified C 1 1 2 toploader to the prevailing operating filtration strong environment and to the application C 1 1 3...
- Page 10 All rights reserved. No part of this publication may be printed or translated in any form or by any means without the prior written permission of Sartorius AG. Sartorius AG reserves the right to make change to the technology, features, specification and design of the equipment without notice.
Need help?
Do you have a question about the 1401 MP8 and is the answer not in the manual?
Questions and answers
what is the meaning of LLLL error?
The "LLLL" display on the Sartorius 1401 MP8 indicates that the operating program is locked. This is shown as "C127 16 digit 'L' display" in the context.
This answer is automatically generated