Advertisement
Quick Links
Advertisement
Related Manuals for Sartorius 1002MP9
Summary of Contents for Sartorius 1002MP9
- Page 1 Electronic Toploader 1002MP9, 1006MP9 Installation and Operation Instructions...
- Page 2 Electronic Toploader 1002MP9 and 1006MP9 Model 1002MP9 Model 1006MP9...
- Page 3 Electronic toploader, Pan; power supply component Connect power supply component (1). Switch balance on (4). First, the auto-check codes are display followed by automatic “0,0 g” by 1002MP9, “0 g” by 1006MP9 Balance calibration: Load test weight (see accessories). Remove cap from calibration button (8). Tare...
- Page 4 Load battery / NC battery: switch balance off, Operating mode switches (5): open battery compt. (3). Insert battery / NC pull open the cover. battery. Important: make sure you have correct switch 3 = stable operating environment, polarity, check for proper setting of the battery switch 4 = automatic switch-off is off.
- Page 5 Duty button When the ON/OFF switch (4) is set to "on", the balance can also be switched off and back on again with the duty button (6). lf there is no weight change for at least 0.5 minutes, the display will read "---" followed by switch-off. To switch on: depress button (6) - display will show multiple eight-check- To switch off: depress button (6) for approx.
- Page 6 All rights reserved. No part of this publication may be printed or translated in any form or by any means without the prior written permission of Sartorius AG. Sartorius AG reserves the right to make change to the technology, features, specification and design of the equipment without notice.