Table of Contents
Advertisement
FITTING THE FRAME (OPTIONAL)
When the ceramic logs and embers layer are correctly positioned in the gas fireplace, refit the glass as described in
the section "Mounting the glass" on page 16.
PROCEDURE TO FIT THE FRAME:
1. Fit the frame in the top of the gas fireplace using the accompanying screws (see the arrows).
2. Place the bottom frame – the magnets ensure that the frame is secure.
3. Place the two side frames – the magnets ensure that the frames are secure.
ADJUSTING THE BASE FRAME
If instead of the optional frame (6 mm), a thicker base frame is used, the height can be adjusted on the brackets.
42
INSTALLATION
Advertisement
Table of Contents
