Table of Contents
Advertisement
Operating Instruction
The 2834431 and 2838231 (with thermostatic valve) appliances should be started
up and, if needed, set up observing indications in the following section:
Fig. 5
Ignition flame lighting up
1. Press the knob (1) and rotate it to position (2).
2. Press the knob (1) fully and switch the ignition burner on, using the piezoelectric
igniter's button.
3. Keep the knob (1) pressed for approx. 20 seconds, and then release it. If the
ignition flame is out, repeat the process.
The ignition flame may be observed via the sight glass, when the grease collection
container is removed.
Switching Main Burner On
1. Rotate the knob (1) from position (2) to one of the settings 1–7.
2. Depending on the desired thermal processing temperature, rotate the knob (1)
from position (2) to one of the positions (4).
Switching Off
1. To switch the main burner off, rotate the knob (1) to position (2).
2. To switch the ignition burner off, press and hold the knob (1), while rotating it to
off position. (3).
2834431
1. Knob
2. Ignition flame lighting up
3. OFF position (0)
4. Control range 1–7
EN
31 / 36
Advertisement
Table of Contents
