Table of Contents
Advertisement
Exchange of Main Burner Nozzle / Primary Air Adjustment
1. Remove the knob(s).
2. Unscrew front guard (operation panel) and remove it from the appliance.
3. Loosen V bolt (Fig. 2).
4. Remove main burner's nozzle, UM (Fig. 1) and exchange it with a nozzle
provided in Table 2 (part of the delivery).
EN
5. Re-tighten main burner's nozzle, UM (Fig. 1).
6. Set the air controller Z (Fig. 2) within the distance of A, as provide in Table 2.
7. Re-tighten firmly the V bolt (Fig. 2).
Exchange of Ignition Burner Nozzle
Fig. 3
26 / 36
Fig. 1
Installation Instructions
1. Remove the front guard / operation
panel.
2. Unscrew the R connection (Fig. 3).
3. Remove the UP nozzle and exchange it
with a nozzle provided in Table 2 (part
of the delivery).
4. Re-tighten the R connection.
5. Reinstall removed elements in reverse
order.
Fig. 2
2834431
Advertisement
Table of Contents
