Advertisement
Dahua HD Mobile Network Camera Quick Start Guide
Step 5 Set the mode as Static, and input the planned Start IP, Subnet Mask and
Gateway.
Note
Set the mode as DHCP when there is DHCP server in the network, the device
will automatically acquire IP address from the DHCP server.
Step 6 Click OK to finish modification.
3.2 Login WEB Interface
Note
Different devices might have different WEB interfaces, the figures in this document are
just for reference, please refer to the document WEB Operation Manual in the disk and
the actual interface for more details.
To login WEB interface, do the following:
Step 1 Open IE browser and input the modified camera IP address in the address bar,
and then press Enter key.
The login interface shows, see Figure 3-3.
Step 2 Input username and password, click Login. The system will pop out WEB main
interface.
Figure 3-2
Figure 3-3
11
Advertisement
