Advertisement
Dahua HD Mobile Network Camera Quick Start Guide
Note
The angle adjustment range of the lens is (-20°～0°) vertically and
(-15°～+15°) horizontally, the image rotation direction is (0°～
+360°).
Step 5 Take up the upper cover and align it with the screw hole sites on the pedestal,
put the cover back in place. Then use wrench to tighten 4 inner hex fixing
screws firmly to complete installation.
Note
Make sure the upper cover is firmly fixed to make the device waterproof.
Step 6 (Optional) Install waterproof connector for network port, which is shown in
Figure 2-4.
Note
It needs to implement this step if the device is equipped with network port
waterproof connector and it is used outdoors.
1.
Keep the convex groove outward and install the rubber ring into the
network port, and keep the smaller hole of the rubber ring outward
and install the fixing rubber ring into the main body of the waterproof
connector.
2.
After pulling the network cable without crystal head through main
body of waterproof connector, fixing rubber ring and waterproof
Figure 2-3
Figure 2-4
8
Advertisement
