Summary of Contents for Dahua Technology IPC-HDW1531SP
Page 1
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Version 1.0.0 Zhejiang Dahua Vision Technology Co., Ltd.
Page 2
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Welcome Thank you for purchasing our network cameras. This user’s manual is designed to be a reference tool for using your product. Please read the following safeguards and warnings carefully before you use this series product. Please keep this user’s manual well for future reference.
Page 3
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Do not directly touch the heat dissipation component of the device to avoid scald. Do not dismantle the device because there is no component that can be fixed by users themselves. Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.
Page 4
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Disclaimer This manual is for reference only. Please refer to the actual product for more details. Minor differences might be found in user interface, and there might be deviation between the actual value of some data and the value provided in the manual due to the reasons such as the real environment is not stable.
Page 5
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Please refer to the disk for more details, check and download the corresponding user’s manual and tool. Before installation, please open the package and check all the components are included. ...
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide 1 Device Structure 1.1 Device External Cable Note The following figure is just for reference for you to know each structure component and the functions of cable ports. There are differences on structure components and cables among different product models, please refer to the actual object for more details.
Page 8
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Figure 1-2 Figure 1-3...
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide 2 Device Installation Note Before installation, please make sure the installation surface can support at least 3x weight of the camera. 2.1 Fix Metal Eyeball Figure 2-1 Step 1 Turn the decoration ring clockwise out of the button placement and take it out. Step 2 Take out the installation position map from the accessories bag, and stick it on the ceiling or wall and other mounting surface according to the monitoring area.
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Note The range of angle adjustment for lens: horizontal rotation direction (0︒~ 360︒), vertical rotation direction (0︒~ 90︒), image rotation direction (0︒~ +360︒). 2.2 Fix Plastic Eyeball Figure 2-2 Step 1 Turn the decoration ring clockwise out of the button placement and take it out.
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Note The range of angle adjustment for lens: horizontal rotation direction (0︒~ 360︒), vertical rotation direction (0︒~ 90︒), image rotation direction (0︒~ +360︒). Step 6 Align the decoration ring with the gap on the pedestal and rotate it clockwise into the pedestal, it is well installed when you hear the “click”...
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide 3 Network Configuration You can initialize the device and modify IP address via "Quick Configuration Tool", for Wi-Fi network camera, it needs to connect to wired network to configure Wi-Fi parameters; You can also initialize device and modify IP address on the WEB interface.
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Figure 3-1 Step 5 Set new password and confirm password, select Email Address and input email address. Note The password can be set as 8 to 32 characters; it can be a combination of number(s), letter(s) and symbol(s) with at least two kinds of them (excluding “'”,“"”,“;”,“:”,“&”).
Dahua HD IR Waterproof Eyeball Network Camera Quick Start Guide Select the devices whose IP addresses need to be modified, and then click . The system will display the dialog box of Modify IP Address, which is shown in Figure 3-2. Figure 3-2 Step 5 Set the mode as Static, and enter the planned start IP, subnet mask and gateway.