Safety / Residual Risks; Manufacturer; Information; Service - Zirkon zahn titanium spectral-colouring anodizer Operator And Maintenance Manual

CHAPTER 1

SAFETY / RESIDUAL RISKS

SAFETY / RESIDUAL
RISKS

MANUFACTURER

Zirkonzahn S.r.l., Headquarters Italy – 39030 Gais – BZ, is the manufacturer of the Titanium
Spectral-Colouring Anodizer and is referred throughout the Operator's and Maintenance Manual
as Zirkonzahn.

INFORMATION

This Operator's and Maintenance Manual is an integral part of the Titanium Spectral-Colouring
Anodizer and must be kept in a place known to the operator and easily and immediately accessible
at all times. Only adequately trained personnel should handle the Titanium Spectral-Colouring
Anodizer.
This Operator's and Maintenance Manual covers all you need to know for safe use and
maintenance of the Titanium Spectral-Colouring Anodizer produced by Zirkonzahn S.r.l.
This manual is subject to amendments at Zirkonzahn's sole discretion in the event of technical
further development.

SERVICE

If any points of these instructions remain unclear or if indications, instructions, safety
instructions or technical explanations have not been fully understood, do not hesitate to
contact Zirkonzahn headquarters (phone +39 0474 066 660 or e-mail: info@zirkonzahn.
com) or the service centers specified in your maintenance contract.
09 09