Alarm Signals; Manual Reset Of Alarms - TESY MultiThermica User's And Installer's Manual

USE
2�5 Alarm signals
1�
Alarm message zone
The faults are indicated on the display of the Control Panel by the symbol
number of alarms that have occurred. The alarm code and description appear in the settings area.
If more than one alarm has occurred, to display them:
act on
–
The settings area displays the alarms that have occurred
use to display the entire alarm message
–
The occurrence of the anomaly may be due to a random situation, in which case the alarm is automatically reset after some
time.
If the anomaly is repeated several times, the appliance is put in safety and the symbol

ance components must be checked in detail by the Technical Assistance Centre.
2�6 Manual reset of alarms
Manual reset of the alarms is an operation to be carried out by the Technical Assistance Centre.

The alarm can be reset after checking the appliance components.
To restore:
– press and hold
– the padlock disappears from the symbol
– then the symbol
14
S FH
31 31
47 47
10 10
for a few seconds
! !
disappears
! !
- - - ! !
° C
S
° C
° C
without padlock and with a digit indicating the
! !
1
appears. In this case, the appli-
! !