WMF PERFECTION 600 Series Operating Instructions Manual page 17

The steam is used to froth the milk. As a higher
temperature is required when producing steam,
the appliance will run an additional pre-heat-
ing phase.
You can push STOP to stop the recipe, you can
can push to go to next recipe step (only for
>>
recipes with 2 or more steps).
NOTE
No possibility to modify the volume
during processing milk recipes (coffee
and milk).
Cleaning after preparing milky drinks
Automatic milk cleaning: The screen indi-
cates Do you want to clean it now? at the end
of each milky preparation.
With the help of the automatic cleaning of the
milk system (Click & Clean), you can clean the
One Touch Cappuccino Block, the milk hose and
the milk pipe. Connect the tip of the milk pipe
with the One the One Touch Cappuccino
17
Block (figure E3). Connect the other end of the
hose to the Click & Clean nozzle.
NOTE
For the best results, it is advised to
clean the One Touch Cappuccino
removable block regularly (see section 11).
2
If you note a change in the quality of your
milk froth, do not hesitate to repeat the rins-
ing and cleaning process: indeed a milk system
that is not well maintained may cause this type
of problem.
NOTE
Automatic rinsing outlets: according to
the type of preparation (coffee or milky
recipe), the machine may complete an auto-
matic rinse program when it switches off. The
cycle lasts only a few seconds and stops
automatically.
ATTENTION
At the end of each milk recipe, the
machine suggests a milk cleaning. We
recommand that you do this to ensure optimum
hygiene and the proper operation of your milk
system.
17