Adjusting The Coffee Outlet; Preparing Drinks; Coffee Drinks; Teas / Hot Water - WMF PERFECTION 600 Series Operating Instructions Manual

7.3| ADJUSTING THE COFFEE OUTLET

For all the drinks available, you can lower or
raise the coffee outlets
of your cup or glass (figure A15).
NOTE
Splashing or scalding may occur if the
coffee outlets
tion to the size of the cups.

8| PREPARING DRINKS

Preparation: Place the cup(s) under the coffee
nozzles. Press the button for the desired drink.

8.1| COFFEE DRINKS

Possible settings: It is possible to modify the
strength of the coffee by selecting different
number of coffee beans.
You can prepare one or two cups with your
appliance by pushing the
It is possible to adjust the volume of the cof-
fee prepared by operating the quantities scale
on the right side of the screen (possible to do
it before launching recipe and during recipe
flow). The machine starts by grinding the beans,
tamping the ground coffee and finally brew-
ing the coffee. Other settings are possible in the
advanced settings of the recipe (by pressing the
three small dots at the top right of the screen):
You can set the temperature of your coffees
and the pre-infusion time (pause between the
moistening of the coffee grounds and the flow-
ing of the coffee).
You can stop the preparation at any time by
pressing STOP.
according to the size
10
are set to high in rela-
10
button (figure C3).
+

8.2| TEAS / HOT WATER

Possible settings: Your appliance allows you to
prepare hot water for teas or herbal tea.
Model 640: You can use the hot water button
to prepare for instance a white tea. Please
22
place the cup below the click & clean outlet
Models 660, 680: Three types of tea (black tea,
white tea, green tea), the hot water tempera-
ture is adapted to the drink selection; you can
adjust volume of the drink (before and during
preparation). Please place the cup under the
coffee outlets .
10

8.3| MILKY DRINKS

Refer to figure D1 – D6 earlier in the instruction.
Before recipe launching
1| Connect the slimmer and longer side of the
milk tube connector
Cappuccino block
NOTE
Take care to well insert the slimmer and
longer side of the milk tube connector
, to insure recipe quality.
17
2| Immerse the other end in a container or glass
with milk or the milk container (dependent
of the model) (figure D3).
3| Place the cup(s) under the coffee / milk noz-
zles (figure D6).
Possible settings: It is possible to increase the
strength of the coffee by selecting different
number of coffee beans, and choose drink size.
Other settings are possible in the advanced set-
tings of the recipe.
16
to the One Touch
17
(figure D1).
2
.
16