The Remote Control; Layout; Timeout - Digital Projection LIGHTING 30-1080p User Manual

For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
4. Controlling the projector

The remote control

Layout

Transmit
indicator
Menu
navigation
keys
Remote control
backlight
ON/OFF

Timeout

There is a 10 second timeout for the three Lens adjustment keys (see note on next
page).
There is a separate, adjustable timeout for the On Screen Menus (see On Screen
Display, in Setup Menu, later in this section).
Page 4.10
All manuals and user guides at all-guides.com
Digital Projection
LIGHTNING 1080p, 1080p 3D/UC
Many features are controlled
from the menus using the menu
navigation keys on the remote
control or keypad.
For more information about
using the menus, see later in
this section, Using the menus.
Some of the menu features, for
example brightness, contrast
and input preset operations, can
be accessed directly using the
control keys at the bottom of

the remote control.

Other features, eg zoom and
focus, are controlled using the
control keys at the top of the
remote control and keypad.
For more information about
Control keys
using the control keys, see
later in this section, Using the
control keys.
The following keys are NOT
used on this projector:
CTRL
R P Y
FUNC
10+
#
There are two infra-red
windows - see Getting to
know the projector, in section
1. Introduction.
Note that plugging in the remote
control cable will disable the
infra-red.
User Manual
Notes
(but N is used)
(but R is used)
Rev B. January 2010