Candy CID 30/G3 Instruction Manual page 20

Technical Specification
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without
prior notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by
the heat radiation from the hotplate. As shown below:
A (mm) B (mm)
268＋4 500＋4
-0
L×W×H(mm)
C (mm)
50mini
-0
CID 30/G3
2 Zones
220-240V~ 50/60Hz
3500 W
288X520X56
268X500
D (mm) E (mm)
50 mini
EN-19
F (mm)
50 mini 50 mini