Fanimation FLORID LP8300 Series Instruction Manual page 14

How to Assemble Your Adapter-Switch Cup (Continued)
3. Assemble the switch cup adapter to the support
bracket using the two key slots in the switch cup
adapter. Replace the previously removed screw and
securely tighten all three screws. (Figure 3)
4. Securely attach the 9-pin connector from the switch
cup to the wiring harness socket from the motor
assembly. (Figure 4)
WARNING
The color label on these two connectors must
correspond to each other.
5. Assemble the switch cup to the switch cup adapter
using previously removed screws and securely tighten
all three screws. (Figure 5)
Motor
Assembly
Motor
Assembly
Switch Cup
Switch Cup
Adapter
Switch Cup
14
Switch Cup
Adapter
Figure 3
Figure 4
Figure 5