Keysight N4376E Getting Started Manual page 8

Lightwave component analyzer
Hide thumbs Also See for N4376E:
Table of Contents

Advertisement

1
Introduction
WARNING
WARNING
WARNING
8
The recycling symbol indicates the general ease with which the
instrument can be recycled.
The C-Tick mark is the certification mark of the Australian
Communications Authority.
The CE mark is the conformity marking of the
European Community.
The CSA mark is a the certification mark of the Canadian
Standards Association.
If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are intact) only.
No operator serviceable parts inside. Refer servicing to qualified service
personnel. To prevent electrical shock do not remove covers.
This is a Safety Class 1 Product (provided with protective earth). The
mains plug shall only be inserted in a socket outlet provided with a
protective earth contact. Any interruption of the protective conductor
inside or outside of the instrument is likely to make the instrument
dangerous. Intentional interruption is prohibited.
Keysight N4376E Lightwave Component Analyzer Getting Started Guide

Advertisement

Table of Contents
loading

Table of Contents