Table of Contents
Advertisement
WARNING
Keysight N4376E Lightwave Component Analyzer Getting Started Guide
Table 1
Laser Wavelength range
Laser Type
Laser Class according to IEC 60825-1
Max. permissible CW output power of LCA
Max. permissible CW output power
Numerical aperture
Beam waist diameter
* CW output power is defined as the highest possible optical output power that the laser source
can produce at the output connector
Please pay attention to the following laser safety warnings:
• Under no circumstances look into the end of an optical cable attached
to the optical output when the device is operational.The laser
radiation can seriously damage your eyesight.
• Do not enable the laser when there is no termination to the optical
output connector, to the optical fiber, or to the attached device.
• The laser output can be controlled by GUI, software and the front
panel button. The laser is on when the green LED above the button
is lit.
• The use of the instruments with this product will increase the eye
hazard.
• Refer servicing only to qualified and authorized personnel
N4376E
850 ± 10 nm
DFB
1M
*
< 4 mW
5.3 mW
0.15
<50 μm
Introduction
1
11
Advertisement
Table of Contents
