Keysight N4376E Lightwave Component Analyzer Getting Started Guide
7
Function keys
8
Network analyzer Port 3
9
Network analyzer Port 2
Used to control the Lightwave Component
Analyzer.
Press the [Macro/Local] Utility button on the
network analyzer to display the LCA function
keys.
•
:
Setup an LCA Measurement
•
: Perform a single sweep
measurement with the current
measurement setup
•
: Perform continuous sweep
measurements with the current
measurement setup
•
: Start the optical power meter
•
: Start the LCA server (if not
already running)
This is an S parameter measurement port of the
Network analyzer.
This is the RF port used for electrical calibration
and to connect to differential EO, OE and EE
devices.
This is an S parameter measurement port of the
Network analyzer.
This is the RF port used for electrical calibration
and to connect to differential EO, OE and EE
devices.
Introduction
1
19