Pcm Viewer; Css Dump - Cisco ATA 191 User Manual

PCM Viewer

Before you begin
ATA registers successfully.
Procedure
Step 1
Sign into Phone Adapter Configuration Utility.
Step 2 Select Administration > Log > PRT Viewer.
Step 3
Configure the PRT Upload URL parameter to specify the server to which you want to send the problem
report. For example:
For more information about the PRT related parameters, see
Step 4 Click Submit.

PCM Viewer

Use the Administration > Log > PCM Viewer to download and view PCM.
The ATA allows you to capture the PCM log file while a user offhook to start a call.
After making your changes, click Submit to save your settings, or click Cancel to redisplay the page with
the saved settings.
Table 14: Log Viewer Settings
Field
PCM Capture Enable
Duration
PCM File List

CSS Dump

Use the Administration > Log > CSS Dump page to set and download CSS dump file.
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
22
http://10.74.133.94:9090
Description
Enable or disable capture PCM.
Enter the PCM capture duration in seconds. The valid range is 20 to
300.
List the PCM file which is captured by user.
Click Refresh to refresh the PCM Memory Dump File. Click Download
to download the dump file on your computer.
.
PRT Viewer, on page
Configure Features
21.