Table of Contents
Advertisement
CAUTION: Do not drop the drive into the drive bay as damage to the drive,
connectors, or baseboard may result. Gently guide the drive carrier assembly into the
drive bay.
3. Press the release handle down until the release catch engages. The drive
cams into place.
4. Repeat steps 1 through 3 for any remaining drives requiring replacement.
5. Ensure the following steps are performed to complete the service action,
including:
Drive replacement is complete. The drive LED and the drive group LEDs on the
front of the enclosure return to normal status.
FAN MODULES
Four fan modules are included in the enclosure, each containing two fans— eight
individual fans per enclosure—that provide system cooling. These fan modules are
hot-swappable. Fan module replacement should be made within five minutes of
removal to ensure proper system airflow and cooling.
The following procedures guide the user in fan module replacement.
ESD-DEVICE: Take anti-static precautions and use the appropriate equipment to
ground yourself, e.g. wrist straps, grounded ESD mat, etc. when working with any
system component.
CAUTION: During fan module replacement, VES recommends the process be
completed within five (5) minutes to ensure proper system cooling.
Removing a Fan Module
1. Identify the fan module to be removed.
ESD-SENSITIVE DEVICE. Always utilize a properly grounded ESD wrist strap or mat
during operation or installation of the device, or when connecting the cables.
2. Ensure the necessary service action preparation was performed as required to
remove a fan module, which includes:
a. "Extending the Enclosure" section.
b. "Removing the Enclosure's Top Cover" section.
3. Push in on the release tab on the fan module identified in Figure 6.14.
83
Viking Enterprise Solutions™ Proprietary Information
a. "Returning the Top Cover to the Enclosure" section.
b. "Returning the Enclosure to the Rack" section.
ONYX Series Harware Guide
Document CTC-DOC-003005
Advertisement
Table of Contents
