Table of Contents
Advertisement
Figure 1.4.1 shows the contents of the expansion storage enclosure.
Front
Figure 1.4.1 Storage enclosure–cover removed
Four fan modules, each containing two dual impeller 40 mm fans—eight individual
fans per enclosure—provide system cooling. Two hot-swappable and fully
redundant power supply units (PSUs) and two 5V DC regulators power the system.
In addition, the enclosure supports one or two I/O modules (IOMs). If one IOM is
used, the other IOM slot must be filled with an IOM blank. A dual IOM configuration
provides redundancy and enhanced performance.
Rack
▪
▪
▪
▪
▪
▪
▪
Storage Expansion Enclosure
• Under top enclosure cover:
o 102 3.5-inch drive bays
o Two I/O option slots
14
Viking Enterprise Solutions™ Proprietary Information
Drive (1 of 102)
Fan module
(1
of 4)
5 V regulator
(1
of 2)
Standard 19-inch rack with cable management
4U high
92.7-centimeter (36.5-inch) enclosure depth
100-centimeter (39.4-inch) enclosure depth with cable management
assembly (CMA) installed
Rail kit supports 68.6-centimeter (27-inch) to 81.3-centimeter (32-inch)
rack depth
94-centimeter (37.0-inch) minimum travel to serviceable position
Conforms to EIA-310-D Specifications
ONYX Series Harware Guide
I/O module
Document CTC-DOC-003005
Top cover
SAS ports
& RJ45
PSUs
Rear
Advertisement
Table of Contents
