Table of Contents
Advertisement
Power Cords
Total of four power cords supplied with the ONYX series, two power cords for the
ONYX series controller and two power cords for the VDS41022 expansion
enclosure. To order additional power cords, please contact a Viking Enterprise
Solutions™ support representative. Do not use extension cords or other third-party
power cords with this enclosure. Additionally, VES recommends the use of an
uninterruptible power supply (UPS).
SAS Cables
One high quality mini-SAS HD (SFF-8644) cables are provided.
If longer cable is needed, it should meet the following requirements:
▪
Maximum Length: 6.0 meters (19.7 feet) for passive copper cables.
Active optical cables can also be used if longer lengths are needed.
▪
There is no maximum length for active cables.
Ethernet Cables
Only high-quality Ethernet cables are recommended as follows:
▪ RJ45 Ethernet cables that support 10/100/1000 Mb/s
27
Viking Enterprise Solutions™ Proprietary Information
WARNING: While some factory-approved maintenance on FRUs (e.g. hot-swapping a
PSU, fan, IOM, regulator, or drive) does not require the user to disconnect power to
the system, performing other types of maintenance on systems connected to an
electrical power supply may result in serious injury or death. Only individuals with
knowledge and training in working with devices containing live circuits should operate
the system. Take precautions when performing all other types of maintenance.
Disconnect power supply cords before servicing.
ONYX Series Harware Guide
Document CTC-DOC-003005
Advertisement
Table of Contents
