Table of Contents
Advertisement
Figure 4.2 5V DC regulator board
5v Regulator Output Specifications
Each regulator meets the following output specifications.
Output Parameter
Main DC Voltage
Table 4.3 5V DC regulator output characteristics
Controlling Enclosures Power
This section provides general instructions on controlling systems power. General
instructions are also provided for controlling power when multiple expansion
enclosures are in use. Individual system configurations may differ based on
customer needs and customization. Contact an IT manager for additional
information on powering the system configuration in use.
POWERING UP THE ONYX SERIES 1U CONTROLLER
Power on the ONYX Series chassis by pressing the power button on the front of
the system.
POWERING UP THE EXPANSION ENCLOSURE
The storage enclosure does not contain a power button. Power is controlled by the
two power cords that plug into a power distribution unit (PDU). Fans, drives, IOMs,
PSUs, and 5V regulators are hot-swappable and do not require the system power
to be shut down during replacement.
56
Viking Enterprise Solutions™ Proprietary Information
5V @ 85A Max
NOTE: N+1 redundancy is not supported if only one PSU is installed.
ONYX Series Harware Guide
438W Value
Document CTC-DOC-003005
Advertisement
Table of Contents
