Table of Contents
Advertisement
Step 2-3: Heat Sink Installation
Step 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well
remember to apply the thermal conductivity compound on the CPU.
Step 2 Seat the heat sink in the retention modules with the four screws. Installation completed.
Step 2-4: Memory Installation
Step 1. Unlock a DIMM socket by pressing the retaining clips outwards.
Step 2. Aling a DIMM on the socket such that the notch on the DIMM exactly match the notches in
the
socket.
Step 3. Firmly insert the DIMMinto the socket until the retaining clips snap back in place.
Step 4. When installing the DIMM into the DIMM socket, we recommend to populate one
DIMM in Channel A module and one in Channel B module for best performance.
Please note that each logical DIMM must be made of two identical DIMMs having the
same device size on each and the same DIMM size.
Step 5. Reverse the installation steps when you wish to remove the DIMM module.
Step 1
Hardware Installation Process
Step 2
1 3
Advertisement
Table of Contents
