1
EAS24500
INSTALLING THE GENERATOR
1. Install:
• Generator rotor
• Washer
New
• Generator rotor bolt
TIP
• Clean the tapered portion of the crankshaft
and the generator rotor hub.
• Lubricate the generator rotor bolt threads
and washer mating surfaces with engine oil.
2. Tighten:
• Generator rotor bolt "1"
Generator rotor bolt
70 Nm (7.0 m·kg, 52 ft·lb)
TIP
While holding the generator rotor "2" with the
sheave holder "3", tighten the generator rotor
bolt.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
3
1
3. Apply:
• Sealant
(onto the stator coil assembly lead grom-
met)
GENERATOR AND STARTER CLUTCH
a
2
5-28
Yamaha bond No. 1215
(Three Bond No.1215®)
90890-85505