Network Configuration - Kaco blueplanet 25.0 NX3 M3 Manual

NOTE
The tool app doesn't use these permissions to record user's phone data. Please grant these permissions to
tool app.

1.2 Network configuration

Network configuration setting as below:
 Network configuration setting.
1 Open the tool app and click the "INSTALLATION" button (The tool app will open the phone's camera).
2 Scan the QR code label on Wi-Fi stick. then the tool app will automatically connect to Wi-Fi stick's hotspot.
3 Click the "Select network" button, choose the Wi-Fi SSID of the nearby router provides Internet network to Wi-Fi
stick. You can also manually enter the router SSID.
4 Fill in the password of SSID selected, click the "Ok" button to start the network configuration.
» Proceed with changing another router, if the router Wi-Fi stick connected to does not work.
5 Wait for the result of the network configuration.
Fig. 6: Home page
Fig. 8: Network configuration
KACO blueplanet 3.0 NX3 M2 - KACO blueplanet 20.0 NX3 M2 + KACO blueplanet 25.0 NX3 M3 -
Fig. 7: Scan QR code
Fig. 9: Successful configuration
KACO blueplanet 33.0 NX3 M3 Page 2