2.2.8 Inverter active power setting: power limit
During Changing in a.c. operation and control or changing in energy source operation, the active power generated by the
inverter shall not exceed a specified gradient expressed as a percentage of the active nominal power of the inverter per
minute. You can set 'Active power gradient for increasing' and 'Active power gradient for reducing' according to the
requirement.
The grid company maybe requires reduction of active power on set point. You can set 'Active power limit' according to the
requirement.
Fig. 22: Power limit
KACO blueplanet 3.0 NX3 M2 - KACO blueplanet 20.0 NX3 M2 + KACO blueplanet 25.0 NX3 M3 -
KACO blueplanet 33.0 NX3 M3
Page 14