Table of Contents
Advertisement
Touch the "End y" field.
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm with the Start/Stop button.
3.
The oven is in standby. The y symbol and the time
when the operation will be finished appear in the status
bar. The operation starts at the appropriate time. You
can see the cooking time counting down in the status
bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the 0 button.
Correcting the end time
This is possible if the oven is in standby. Use the 0
button to open the time-setting options menu, touch
"End y" and use the rotary selector to correct the end
time. Press the 0 button to close the menu.
Cancelling the end time
This is possible if the oven is on standby. To do so,
open the time-setting options menu using the 0 button.
Touch "End y" and reset the End time using the rotary
selector. The cooking time immediately starts to count
down.
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
The control panel is locked and no settings can be
made. The appliance can only be switched off using the
on/off button.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the / button for approx. 4
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.
Childproof lock
en
23
Advertisement
Table of Contents
