Huck AEROBOLT 10224 Manual
  1. Manuals
  2. Brands
  3. Huck Manuals
  4. Tools
  5. AEROBOLT 10224
  6. Manual

Huck AEROBOLT 10224 Manual

Huck gun
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

HUCK GUN – 10224
Huck air gun for Huck bolts and Huck structural rivets diameters 4.8 & 6.4 mm (3/16' & 1/4')
The 10224 is the workhorse of Huck guns, a versatile all aluminium body that can install both Huck bolt's pin
and collar and Huck structural blind rivets with the changeover of a nose assembly (priced separately). The
HG-10224 is suitable for both truck fabrication workshops and smash repair operations. Built tough to stand
up to the most rigorous working conditions.

HG-10224 Specifications

Weight
2.8 Kg
Air Pressure
6.21 – 6.9 bar (90-100psi)
Stroke
21mm
Pulling Force
19kN @ 6.21 bar
Huck bolts & Huck rivets 4.8mm (3/16") &
Fastener Capacity*
6.4mm (1/4") with different noses
* Nose assemblies sold separately.
Tool includes: Operating manual, pintail deflector, toolkit
incl. 1/4" BSP (British Standard Pipe) fitting, spanner and
bleed tool.
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEROBOLT 10224 and is the answer not in the manual?

Questions and answers

Related Manuals for Huck AEROBOLT 10224

Summary of Contents for Huck AEROBOLT 10224

  • Page 1 Huck air gun for Huck bolts and Huck structural rivets diameters 4.8 & 6.4 mm (3/16' & 1/4') The 10224 is the workhorse of Huck guns, a versatile all aluminium body that can install both Huck bolt’s pin and collar and Huck structural blind rivets with the changeover of a nose assembly (priced separately). The HG-10224 is suitable for both truck fabrication workshops and smash repair operations.
  • Page 2 Before assembling, inspect all parts and replace if necessary. Clean all parts thoroughly with mineral spirits and lubricate with Lubriplate No. 1300AA (Huck Part Number: 502723). A good practice to follow is to replace all O-Rings when the tool is disassembled for any reason. Then assemble, taking care not to damage O-Rings, handle and cylinder housing.
  • Page 3 Filling the tool 1. With cylinder cap (51) and air hydraulic piston removed, invert the tool and fill with filler bottle (Huck Part Number: 100932) with automatic transmission fluid until it levels O-Ring (31). 2. Insert piston assembly and push it all the way ten times.
  • Page 4 HG-10224: Exploded View Page 4 of 5...
  • Page 5 HG-10224: Parts List Page 5 of 5...

Table of Contents