Table of Contents
Advertisement
<Change Default Settings (Fax)>
Specify settings used for sending faxes. The selected settings are used as the default settings when scanning
originals.
Changing the Default Settings for Functions(P. 179)
<Resolution>
<200 x 100 dpi (Normal)>
<200 x 200 dpi (Fine)>
<200 x 200 dpi (Photo)>
<200 x 400 dpi (Superfine)>
<400 x 400 dpi (Ultrafine)>
<Density>
Nine Levels
*1
<2-Sided Original >
<Off>
<Book Type>
<Calendar Type>
<Sharpness>
Seven Levels
<Off-Hook Alarm>
Select whether the machine makes an alert sound when the handset of a telephone connected to the machine
is not properly set on the cradle. You can also adjust the volume of the alert sound.
0
to 3
<Menu>
<Function Settings>
volume of the alert sound
<ECM TX>
Enable or disable error correction mode (ECM). ECM checks for fax data errors and corrects them. To reduce
errors on received faxes, see
<Off>
<On>
<Menu>
<Function Settings>
●
ECM must be enabled on both the machine and the other fax device because error checks are
performed on both the sending and receiving devices.
Setting Menu List
<Send>
<Apply>
<ECM RX>(P. 572) .
<Send>
564
<Fax Settings>
<Off-Hook Alarm>
<Fax Settings>
<ECM TX>
Select the
<On>
Advertisement
Table of Contents
